Availability:
Estimated Arrival: Between Oct 19 and Oct 21. *ETA to USA Only
Shipping & Returns: FREE Shipping to lower 48 states
Description
The Aims Power 4000W inverter charger produces a pure sine wave which is stable and can power laser jet printers, computers, televisions, CPAP machines and other medical and sensitive equipment. Great for vehicle up-fitting as well as boat and RV applications.
The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers.
Use this Inverter Charger for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle up-fitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120 volts AC. Will accept 4/0 (0000 AWG) cable.
The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air.
A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance.
Emergency Backup Power. This Inverter Charger is great for emergency backup power applications. The automatic transfer switch on this unit keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant.
Off-grid/Mobile Businesses: Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment.
Runs power tools. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 Watt Low Frequency AIMS Power Inverter Charger.
Smooth Electrical Current. Because they provide seamless and smooth electrical current comparable to household, business and industrial power, pure sine inverter chargers are a popular choice for converting direct-current battery power to alternating-current electricity for residential or commercial use. With this type of inverter charger, you can use pure sine wave to produce cleaner power.
All-in-One Device. Acting as a DC inverter with charger, inverter-chargers are all-in-one devices. They convert DC power to AC power. At the same time, they charge a backup battery bank for use when AC power is disconnected or electricity from the local utility is lost. That makes them a great choice for off-grid living or simply for emergency preparedness.
This inverter also has an optional remote port, allowing you to turn the product on and off from a distance.
Combine this solar inverter charger with a deep -cycle battery bank for off-grid, mobile and emergency backup power.
For over a decade, the AIMS’ Power has consistently delivered the broadest range of sizes to accommodate virtually every power requirement.
Advantages of a pure sine inverter:
-Equipment runs more efficiently
-Motors run cooler
-Cleaner power
-Ideal for power tool chargers, laser printers, electric shavers, microwaves, variable speed motors, TV’s, medical equipment
AIMS Power 4000 Watt Inverter Charger Features
- 4000 Watt Low Frequency Inverter
- 12000 Watt Surge for 20 seconds 300% Surge Capability
- Battery Priority Selector
- AC Direct Connect Terminal Block for Hardwire
- Marine Coated and Protected
- Multi-stage Smart Charger 100 amp
- Charges Lithium LiFePO4, Gel, AGM and Lead Batteries. We recommend to Check Battery Charging Specifications for all Batteries.
- Remote Panel Available
- Auto Frequency
- 10msec Typical Transfer Time
- Selectable 25W Power Save Mode (hibernation)
- 7 Battery Type Settings for Charger
- Automatic Transfer Switch
Click Here: AIMS Power 4000 Watt Inverter Charger - PICOGLF40W12V120V
Why Buy an Inverter Charger?
Specs
AIMS 4000 Watt Inverter Charger Specifications
Inverter Output Specifications | |
Continuous Output Power |
4000 Watts |
Surge Rating |
12000 Watts (20seconds) |
Output Waveform | Pure Sine/Same as Input (bypass Mode) |
Nominal Efficiency |
> 88% (Peak) |
Line Mode Efficiency |
>95% |
Output Frequency |
50Hz +/-0.3Hz / 60Hz +/-0.3Hz |
Typical Transfer Time |
10ms (Max) |
THD |
<10% DC |
Ambient Operating Temperature |
14 degrees F to 122 degrees F (-10 degrees C to 50 degrees C |
Input Specifications | |
Nominal Input Voltage |
12.0 Vdc |
Minimum Start Voltage |
10.0 Vdc |
Low Battery Alarm |
10.5Vdc-11.0 Vdc |
Low Battery Trip |
10.0Vdc-10.5Vdc |
High Voltage Shutdown |
16.0Vdc |
Low Batter Voltage Restart |
13.3Vdc |
Idle Consumption |
<3.47 amps DC |
Power Saver Mode Idle Consumption |
<0.53 amps DC |
Charger Specifications | |
Output Voltage |
Depends on Battery Type |
Charge Rate |
115A |
Over Charge Protection Shutdown | 15.7V |
Selectable Charge Setting Based on Battery Type | yes |
Adjustable Charge Current | off-20%-100% |
Four Stage Smart Charger | yes |
Transfer Switch Specifications | |
Automatic Transfer Switch | 40 amp |
Typical Transfer Time |
10ms (max) |
Dimensions | |
Weight |
64 lbs |
Unit Size |
23.5 x .75 x 7.10 inches (L xW xH) |
Shipping & Returns
Order Confirmation:
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within five business day ( most orders are sooner) from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at support@PortablePowerPlus.com
Cancellations:
We want you to be HAPPY! Please reach out prior to ordering so we can help you make a great purchase decision. We are proud to offer FREE SHIPPING to our customers but if you decide you no longer want your item after it has shipped, you can request a full refund within 24 hrs after placing your order. If you request a cancellation after 24 hrs and before delivery, you will be charged a 25% restocking fee and a transaction fee (2.6% for credit card users, 3.6% for PayPal users, and 2.9% for Shop Pay users) plus shipping for delivery and return. Orders purchased greater than 30 days can not be cancelled.
Returns:
Returns are accepted within 30 days of the item being delivered. Return service is only available for US orders. You must be in possession of the order items. Please call us at 980-758-0075 or email support@PortablePowerPlus.com to register return and receive an RMA (return merchandise authorization) number and directions for the return. NO RETURNS WILL BE ACCEPTED WITHOUT AN RMA. You may be charged a 25% restocking fee, delivery fee may be deducted from your return, and you may be responsible for shipping your return, based on individual manufacturer policies. Please reach out to us if you have questions prior to purchase.
When shipping your return
Product must be in original packaging and include all manuals and accessories
Please provide your invoice with the return. Write your unique RMA on your invoice as well as the return shipping label ( MUST be clearly marked on the outside of the package) You must ship within 5 days of receiving your RMA number
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery. If your item(s) do arrive damaged, please send photos to support@PortablePowerPlus.com along with detailed description.W e will work with the manufacturer to get a replacement sent as soon as possible. If you choose to not accept the replacement you will be responsible for the shipping both ways as well as the restocking fee of 25%. Please note we must be notified within 30 days otherwise you will have to go through the manufacturer’s warranty for replacement.
Shipping and return policies will vary by manufacturer.
Refunds:
After your return is received and processed, we will issue your refund within 14 business days, and you will be notified with an email once your order is refunded.
If you don't receive the refund after 14 business days, please contact us at support@PortablePowerPlus.com